TM series
Round forged heads in, clean hexagon, square and flange heads out. Four fully automatic models for 4 to 10 mm, at up to 100 a minute.
Scroll through a single cycle of the trimmer. Each step lights up the part doing the work.
Headed blanks from the cold header slide down the feed rail, each with a round forged head.
A transfer finger places each blank in line with the trim die.
The punch pushes the head through the shaped die, shearing it to a hexagon, square or flange.
More complex shapes can take a second pass for a clean finish.
The scrap ring falls away and the trimmed part drops out, ready for thread rolling.
Tap a model to see its numbers and its size range.
All four models, side by sideEvery specification and feature in the 4 page brochure.Download PDFAt full speed
Max output from the published specification. Real output depends on part length, head and material.
Feeds, trims and ejects without an operator at each part.
High output from a compact machine.
Clean, even flats on every head.
Set for the head size and shape you run.
Each blank is placed the same way every cycle.
Heads that match from the first part to the last.
No. Only heads with flats, such as hexagon, square and flange heads, need trimming. Round and recessed heads go straight to slotting or rolling.
The TM-5 starts at 4 mm.
How it works, features and every specification, in 4 printable pages.
