TR series
Threads pressed in, not cut, at up to 300 a minute. Seven flat die models roll 2 to 12 mm threads, including self tapping gauges #2 to #16.
Scroll through a single cycle of the thread roller. Each step lights up the part doing the work.
Headed blanks slide down the feed rail, and the feed finger pushes each one in between the dies.
The moving die slides past the fixed die and squeezes the blank between them.
The blank rolls as the die moves, and the thread form is pressed into its surface.
Both dies stay in step, so every thread starts cleanly and matches the one before it.
The screw leaves fully threaded. No metal is cut away, so there are no chips and no waste.
Tap a model to see its numbers and its size range.
All seven models, side by sideEvery specification and feature in the 4 page brochure.Download PDFAt full speed
Max output from the published specification. Real output depends on part length, head and material.
Takes the rolling load without flexing.
Smooth running slides with replaceable wear parts.
Speed set to the job, from setup to full production.
Damps vibration for a steady roll.
Faster die matching when you change size.
Gauges #2 to #16 on the TR-3 to TR-8.
Yes, within its range. A TR-5 covers 3 to 5 mm by changing the dies.
Yes, dies for TR series machines are kept in stock. Tell us the model and thread.
How it works, features and every specification, in 4 printable pages.
