Slotting and BT cut
Clean screwdriver slots and self tapping BT notches, at up to 90 a minute, with automatic dial feed. Two machines for 2 to 6 mm screws.
Scroll through a single cycle of the slotting machine. Each step lights up the part doing the work.
The vibratory bowl lines the screws up and sends them down the chute to the dial.
The dial grips each screw and indexes it round to the cutter, with the tip support holding it steady.
The rotary saw comes down and passes through the head, or across the point.
A screwdriver slot in the head, or a BT notch at the point of a self tapping screw. Two passes when a deeper cut is needed.
Finished screws drop out down the chute, ready for thread rolling or packing.
Tap a model to see its numbers and its size range.
Both machines, side by sideEvery specification and feature in the 4 page brochure.Download PDFAt full speed
Max output from the published specification. Real output depends on part length, head and material.
Clean slots and notches at speed.
Holds the screw steady while it is cut.
Screws are indexed to the cutter one by one.
For deeper or cleaner cuts where needed.
Faster size changes.
Easier on the operators.
A notch cut at the point of a self tapping screw. It lets the screw clear material as it forms its own thread.
Usually before. The slot is cut on the headed blank, then the thread is rolled.
How it works, features and every specification, in 4 printable pages.
